background image

Previous view

10

3

BASIC OPERATION

 Transmitting

CAUTION:  

Transmitting without an antenna will dam-
age the transceiver.

  

NOTE: 

To prevent interference, listen on the channel 

before transmitting by opening the squelch. To open 
the squelch, rotate 

[DIAL]

 counterclockwise or push 

[SQL

Z

 on the microphone.

q

 Set the operating frequency. (p. 5)

 • 

 

Adjust the output power if desired. See page 11 for 
the details.

w

 Hold down 

[PTT]

 to transmit.

 • 

The 

$

” icon appears.

 

• The S/RF indicator shows the output power level.

 • 

 

The One-Touch PTT function can be used. See 
page 11 for details.

e

  Speak into the microphone at your normal voice level.

 • 

 

DO NOT hold the microphone too close to your mouth, 
or speak too loudly. This may distort the signal.

r

 Release 

[PTT]

 to receive.

LOCK

SET

ANM

MONI

DUP

LOW

T-SCAN

TONE

PRIO

M/CALL

SCAN

V/ MHz

DIGITAL PRIO AO

MUTE
NAR

MID

LOW

Output power level

Selected output power

Appears

IMPORTANT! 

(for 65 W transmission)

:

 

The IC-2300H has a built-in current detector circuit 
which protects the power amplifi er from excessive cur-
rent fl ow. When excessive current fl ow is detected, the 
circuit automatically reduces the transmit output power 
to approximately 25 watts. 
The IC-2300H has a thermal detector circuit too, which 
protects the power amplifi er from excessive heat. As 
the temperature increases, the circuit automatically re-
duces the transmit output power to approximately 10 to 
20 watts.

Содержание IC-2300H



































































Отзывы: