Icom i7200 Скачать руководство пользователя страница 92

Страница: 92 / 104

OPTION INSTALLATIONS

■

MB-116

handles

installation

The optional MB-116

handles

are convenient when

moving the transceiver and can protect the face and
radio knobs during transport.

➥

Attach the MB-116 to the both sides of the trans-

ceiver with the supplied screws (M4 × 9).

Screws
(M4 × 9)

■

MB-117

carrying

handle

installation

The optional MB-117

carrying

handle

is convenient

when carrying the transceiver for DX-peditions, field
operation, etc.

Attach the rubber feet to the

[FOOT]

holes on

the right side of the transceiver with the supplied
screws (M4 × 12).

Attach the MB-117 to the

[CARRYING HANDLE]

holes on the left side of the transceiver with the
supplied screws (M3 × 10).

Rubber feet

Carrying handle

Screws

(M4 × 12)

Screws

(M3 × 10)

■

MB-118

mobile

mounting

bracket

installation

The universal mounting bracket allows overhead
mounting.

• Mount the transceiver securely with the 4 supplied screws

(5 × 20) to a thick surface which can support more than
5.5 kg (12.1 lb)

CAUTION:

Non-supplied bolts (longer than 8 mm)

may damage the internal units.

NEVER

install the MB-118 with the non-supplied

screws and bolts.

MB-118
(Optional)

Flat washer

Bolt
(M4 × 8)

Screw
(5 × 20)

Spring washer

Содержание i7200









































































































Результаты поиска

Содержание i7200

Отзывы:

Icom i7200, Инструкция по эксплуатации, Страница: 92 / 104

Результаты поиска

Содержание i7200

Отзывы: