Icom F6220D 16 USA, Инструкция по эксплуатации

Страница: 6 / 24

2
1
PANEL DESCRIPTION
Function display
■
q w e r t y u i o
!0
q
TRANSMIT ICON
Appears while transmitting a signal.
w
BUSY ICON
Appears while the channel is busy (receiving).
e
SIGNAL STRENGTH ICON
Shows the relative receive signal strength level.
Weak Receive Signal level Strong
About
“ ”
icon for the Trunking mode
Disappears while in the no service area.
➥
Blinks while registering to the repeater.
➥
Appears when the registration is completed.
➥
r
LOW POWER ICON
Appears when low output power is selected.
t
AUDIBLE ICON
In the analog mode, appears when the CTCSS (DTCS)
➥
squelch mute is released while holding down [Monitor].
In the digital mode, appears while holding down [Moni-
➥
tor].
y
GPS ICON
Appears when the GPS receiver acquires the received
GPS signal from a satellite.
u
ENCRYPTION ICON
In the digital mode, appears when the encryption function
is activated.
i
BELL ICON
In the digital mode, appears/blinks when a SDM (Short
Data Message), Status Call or Call Alert is received, de-
pending on the preprogramming.
o
SCAN ICON
Blinks during a scan.
➥
Appears when a scan channel is selected.
➥
!0
ALPHANUMERIC DISPLAY
Displays an operating channel number, channel name,
User Set mode contents, and so on.