Icom dPMR446, Руководство по эксплуатации

Страница: 9 / 35

PANEL DESCRIPTION
2
2-4
The Status indicator indicates the status of various
parameters of the transceiver, as described below�
(Reference: R=Red, G=Green, O=Orange)
• Programming:
Blinks while reading or writing data�
• Programming Error:
Continuously blinks green and red if programming
fails�
• Channel Error:
Continuously blinks red and orange when you select
a blank channel, or an unlocked channel�
• TX Low Battery 1:
Blinks while detecting a low battery while
transmitting�
• TX Low Battery 2:
Blinks while detecting a very low battery while
transmitting�
• TX:
Lights while transmitting�
• Bell (Blink):
Blinks about twice every second, when the preset
signal* is received�
• Bell (ON):
Blinks about once every second, when the preset
signal* is received�
* Depending on the “Bell” setting, the Status indicator blinks:
• When a Break-in is received�
• When a Status call that includes a matching status
number is received�
• When a Call Setup is received in the dPMR™ operation�
• Scan:
Blinks green while scanning for a channel with a
signal�
• Low Battery 1
Blinks slowly when you should charge the battery
soon�
• Low Battery 2
Blinks fast when you should charge the battery soon�
• RX:
Lights green while receiving a signal�
G G G G G G G G
R G R G R G R G R G R G R G R G
R O R O R O R O R O R O R O R O
R R R R R R R R R R R R R R
R R R R R R R R R R R R
R R R R R R R R R R R R R R R R
O O
O O
G G
G G G G G G G G G G G G G G G G
G G G G G G G G G G G G G G G G
G G G G G G G G G G G G G G G G
Status indicator
► Continued on the next page