Icom D-STAR ID-4100A Скачать руководство пользователя

Страница: 42 / 273

D-STAR OPERATION

4-5

Using the DR scan

The DR scan scans frequencies to find a signal on a

repeater or a simplex frequency.

You can use two kinds of DR scans, Normal scan and

Near Repeater scan.

Normal scan

To quickly find a repeater, the Normal scan skips

repeaters that are not specified as an access repeater.

(The “USE (FROM)” setting is set to “NO” (SKIP is

set) on the repeater list.)

Near Repeater scan

The Near Repeater scan searches for up to 20 nearby

repeaters by using your location and the repeater’s

entered location, and then lists the repeaters.

The Near Repeater scan will continue, even if you

turn OFF the power, and then turn it ON again

during the scan.

If your own position is not being received, the last

received position is used.

Example: Selecting the “HamFair” repeater in Japan

using the DR scan.

1. Hold down [DR] for 1 second to display the DR

screen.

2. Hold down [SCAN] for 1 second.

•Displays the DR scan setting window.

DR scan

setting window

3. Rotate [DIAL] to select the scan type.

• Normal:

Searches for repeaters whose “USE (FROM)”

setting is set to “YES.”

• Near Repeater (ALL):

Searches for up to 20 nearby DV or FM

repeaters. (Total 40 repeaters)

• Near Repeater (DV):

Searches for up to 20 nearby DV repeaters.

• Near Repeater (FM):

Searches for up to 20 nearby FM repeaters.

4. Push [

•The selected scan starts.

While DR scanning

The repeaters

are sequentially

displayed.

While DR scanning, the repeaters are sequentially

displayed.

The scan resumes the same as other scans.

(p. 9-18)

5. When the transceiver receives a signal from a

repeater, the scan stops.

6. Push [SCAN].

• The DR scan is canceled, and the repeater is set to

“FROM.”

NOTE:

Even if your transceiver receives a repeater

signal, the repeater may not receive your signal,

because the repeater’s output power is higher than

your transceiver’s, and your signal doesn't reach the

repeater.

TIP:

The DR scan scans the simplex frequencies in

the repeater list, in addition to a D-STAR repeaters.

“FROM” (Access repeater) setting (Continued)

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды