Icom D-STAR ID-4100A Скачать руководство пользователя страница 26

Страница: 26 / 273

SCAN OPERATION

2-7

A Memory Bank scan searches through the Memory

channels in the selected bank.

Two or more Memory channels, which are not set as skip

channels, must be entered to start a Memory Bank scan.

(p. 1-8)

1. Push [V/M] several times until you enter the

Memory mode.

2. Push [QUICK].

3. Rotate [DIAL] to select “Bank Select,” then push

[

4. Select a bank to be scanned, then push [

5. Hold down [SCAN] for 1 second.

•Opens the Scan Type Select window.

If you hold down [SCAN] for 3 seconds, the last

selected scan starts.

6. Rotate [DIAL] to select a scan type, then push

[

•The scan starts.

The decimal point and

blink.

When receiving a signal, the S-meter displays the

received signal strength.

7. Push [SCAN].

•Cancels the scan.

Memory Bank scan

Scan type

•ALL:

Full bank scan

•BANK-LINK: Bank link scan

•BANK-A ~ Z: Bank scan

( Displays only banks which contain a

Memory channel.)

•DUP:

Duplex scan

( Displayed only when duplex is set on

the channel.)

•TONE:

Tone scan (For tone scanning)

When all channels are set as “SKIP” or “PSKIP,” the bank

is skipped during a Bank Link scan. (p. 2-8)

When all channels in the selected bank are set as “SKIP”

or “PSKIP,” the scan does not start.

When two or more Memory channels, which are not set

as Skip channels, are entered in a bank, the Memory

bank scan is usable. (p. 2-7)

TIP:

• During a scan, rotating [DIAL] changes the

scanning direction.

• The scan continuously runs, even if you push

[MENU] or [QUICK] during a scan.

• During a scan, you can change the bank to be

scanned on the Quick Menu window.

About a Bank name

When a Bank name is assigned, the name is

displayed on the Scan Type Select window.

The scan name is not displayed during a scan.

See

page 1-11 to enter the Bank name.

When the Bank name is assigned

Bank name

When the Bank name is not assigned

Bank initial

[DIAL]

[ ]*

[QUICK]

[V/M]

[SCAN]

*The key operation may differ,

depending on the operating status.

Previous view

Содержание D-STAR ID-4100A


















































































































































































































































































Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды

Icom D-STAR ID-4100A, Руководство для продвинутых пользователей

Результаты поиска

Содержание D-STAR ID-4100A

Отзывы:

Похожие инструкции для D-STAR ID-4100A

Бренды по названию

Популярные бренды