Icom D-STAR ID-31A; D-STAR ID-31E, Инструкция по эксплуатации

Страница: 33 / 80

New2001
24
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■
Operating mode selection
Operating modes are determined by the modulation of the
radio signals. The transceiver has a total of three operating
modes; FM, FM-N and DV.
➥
Push [FM/DV] one or more times to select a desired
operating mode.
FM
FM-N
DV
FM mode selected
FM-N mode selected
DV mode selected
■
Receiving
Make sure a charged BP-271 or BP-272 battery pack, or a
BP-273 battery case with brand new alkaline batteries is at-
tached (pp. 1, 14).
Hold down
q
for 1 second to turn ON the power.
Rotate [VOL] to adjust to a desired audio level. (p. 19)
w
• The frequency display shows the volume level while adjusting.
Set the receiving frequency. (p. 23)
e
r
Set the squelch level. (p. 20)
• While holding down [SQL], rotate [DIAL] one click to display the
squelch level.
• “ LEVEL1” is loose squelch (for weak signals) and “LEVEL9” is
tight squelch (for strong signals).
• “ AUTO” indicates automatic level adjustment by a noise pulse
counting system.
• Hold down [SQL] to manually open the squelch.
t
When a signal is received:
• Squelch opens and audio is output.
• TX/RX indicator lights green.
• The S/RF-meter shows the relative signal strength level.
q
r
Set squelch level
e
Set frequency
w
Adjust audio level
r
Push when setting
the squelch
(Push to monitor)
TX/RX
indicator