ICODIS Vivid 818, Инструкция по эксплуатации

Страница: 20 / 40

The projector’s remote control isn’t functioning.
• Please use the remote control aiming at the back of the machine,
not the projection screen.
• Try moving closer to the projector with the remote.
• Check that the batteries are functioning and inserted properly.
The projector is not projecting.
• Check that there are no obstructions between the projector and
the projection surface.
• Check the battery charge on the projector. If depleted, try
powering the projector on
while the unit is plugged into power.
• If plugged into power, check that the charging indicator light on
the unit is illuminated.
• Power the unit off, press the restart button, and power the unit
back on.
• If connected to the projector with a cabled HDMI connection:
-- Check that the HDMI cable is securely plugged into the HDMI
port on your device and the HDMI port on the projector.
-- Check that you choose the correct signal source - HDMI
-- Check that you are using any necessary adapters or cables to
connect your device. Also check with your device manufacturer
to ensure your device supports HDMI video out and you are
using any required cables and/or adapters to make the connec
tion. If an adapter is required, power down the projector, add the
adapter, and then turn the projector back on.
TROUBLESHOOTING
01 02
03 04
05 06
07 08
09 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34
35 36
37