ICO VKP1010, Быстрый старт

Страница: 4 / 7

Align the coring blade:
The fork should be able to pass through the center of the circular
blade without touching the sides (see correct alignment on the diagram)
The blade MUST be tightened firmly so it will not move out of
alignment during operation. * Use caution when adjusting, blade is sharp!
Align, adjust and secure blades:
Before using the peeler it is critical that the blades
are properly aligned, adjusted and secured.
Misaligned or unsecured blades will damage the peeler.
Test alignment:
To verify that your alignment is correct, press down on
the release lever and move the shaft forwards and
backwards. Watch that the fork passes through the center
of the coring blade without touching the sides of the
coring blade
.
Adjust peeling blade:
The peeling blade works best when adjusted to about 1/8 inch past the head of the peeling arm.
To adjust the peeling blade, loosen the wing-nut 1/2 turn. The blade can be moved forwards to
remove more peel or backwards to remove less peel. Firmly tighten the wing-nut after
adjustment has been made. It may require a few tests and further blade adjustments before you
get the desired result. * Use caution when adjusting, blade is sharp!