ICM Controls ECA PRODUCTS ECAIOO-II, Руководство по установке

Страница: 3 / 8

ECA100-11
2 = 12A@ECA100-11
3 = 32A@ECA100-11
4 = 80A@ECA100-11
ECAI00-II
ECAI00-II
NOTICE:
When
ECAI00-II
is set to MANUAL Start mode, the
indicator lights (Red LED 1, Red LED 2, Red LED 3) will be lit up
sequentially after the Start Delay (TC) is over. The condition
remains until the user presses the START Push button to re-start.
ECAI00-II
ECAI00-II
ECAI00-II
a) Using a Flathead screwdriver, pull downward the mounting bracket that
you can see at the rear and bottom side of the
ECAI00-II
, as shown in figure.
ECAI00-II
ECAI00-II
THE
After the first stall/trip of the motor due to a fault
condition, the protective relay will disconnect
sooner, according to the hot curve.
ECA100-11
ECA100-11
ECA100-11
ECA100-11
ECA100-11
ECA100-11
ECA100-11
ECA100-11
Phasing
E527483
ECAI00-II
ECA100-11
2 = 12A@ECA100-11
3 = 32A@ECA100-11
4 = 80A@ECA100-11
ECAI00-II
ECAI00-II
NOTICE:
When
ECAI00-II
is set to MANUAL Start mode, the
indicator lights (Red LED 1, Red LED 2, Red LED 3) will be lit up
sequentially after the Start Delay (TC) is over. The condition
remains until the user presses the START Push button to re-start.
ECAI00-II
ECAI00-II
ECAI00-II
a) Using a Flathead screwdriver, pull downward the mounting bracket that
you can see at the rear and bottom side of the
ECAI00-II
, as shown in figure.
ECAI00-II
ECAI00-II
THE
After the first stall/trip of the motor due to a fault
condition, the protective relay will disconnect
sooner, according to the hot curve.
ECA100-11
ECA100-11
ECA100-11
ECA100-11
ECA100-11
ECA100-11
ECA100-11
ECA100-11
Phasing
E527483
ECAI00-II