Icle bubba Moon, Руководство пользователя, Страница: 9 / 14

1.
Insert the
metal frame of the
hood into the
corresponding re-
ceptors located on
the pram frame.
3.
To remove the
hood, unfasten the
zip, then press
both of the
hood connector
but-tons and pull the
metal hood frame
upwards
.
Assembly - Installing the Pram Hood
2.
Align the zip located
on the rear side of the
hood to the zip found
on the pram /seat
unit fabric and fasten.
Assembly - Preparing the Seat Unit
1.
Firstly, locate the seat
unit support.
2.
Align either side of the
support with the two holes
situatied on both sides of
the inner seat frame.
Ensure that the support
is facing downwards and
towards the lower end of
the seat frame.
3.
Push the support into
the holes and secure in
place with the two push
press clips located on
the seat unit fabric.
V.02.21
9