Engineering Manual for
AXS Series S40/S40i Keypad
S40/S40i Engineering Manual
Page 3 of 8
www.storm-interface.com
Rev 2.3 May 2016
© Copyright Storm Interface. 2015. All rights reserved
Typical Wiring
Below is a typical wiring schedule – in this case between the S40 and the Kantech KT-300 Controller
The S40 is shown connected to control Door 2.
Where there is an LED connection, usually the GREEN LED connection is appropriate
Wire name
Wire colour
KT-300
S40
Wiegand Data 0 Green
READ2 Green
Pin K
Wiegand Data 1 White
READ2 White
Pin J
0V
Black
READER PWR GND
Pin E or Pin F
+12V
Red
READER PWR +12V
Pin I
Buzzer
Blue
OUT DOOR 2 BUZ
Pin B
LED
Brown
OUT DOOR 2 LED
Pin H
Shield
Outer Foil
EGND
Do Not
Connect
