background image

19

Important Safety Information

WARNINGS!

IMPORTANT:  Read these instructions carefully before use and keep them for future 

reference.  Your child’s safety may be affected if you do not follow these instructions.

Failure to follow these warnings and the instructions could result in serious injury or 

death.

• 

Never leave your child unattended.

• 

Do not use if any part is broken, torn or missing.

• 

This product is not suitable for running or skating.

• 

Do not take your stroller on the escalator.

• 

Avoid using stairs when the child is in the pram/stroller.

• 

Care should be adopted when moving the pram/stroller up and down curbs and steps.

• 

When adjusting the Stomp’s components, children should be kept clear of moving parts 
while making adjustments.

• 

Always apply the brake when loading or unloading your child.

• 

Always apply the brake whenever the pram/stroller is stationery.

• 

To avoid danger of suffocation to babies and children keep plastic bags out of their reach.

• 

Ensure that all the locking devices are engaged before use. 

• 

To avoid injury, ensure that your child is kept away when unfolding and folding this product. 

• 

Always use the restraint system in combination with the seat unit. 

• 

Check that the pram body or seat unit or car seat attachment devices are correctly engaged 
before use. 

• 

Only use the seat units, carrycots, car seats, accessories and approved replacement parts 
approved by Ickle Bubba.

• 

Do not make any changes to this product.

• 

Your child should be clear of moving parts before adjusting the position of the 

• 

backrest, foot rest or canopy.

• 

Ensure that your baby is comfortable and does not overheat when using the rain cover.  The 
mesh ventilation panels on the sides of the rain cover are essential to aid the flow of cool air 
around your baby.  The top section should be opened or the the rain cover removed unless it 
is raining or very cold.

• 

Never use force.  Adjustments and locks should be free and easy to operate.

• 

Do not use near an open fire or exposed flame.

Содержание Stomp Travel System

























Отзывы: