02
CARE AND MAINTENANCE
•
Never move the highchair whilst the baby is inside it.
•
This highchair is only intended for use of one baby at time.
•
When the highchair is not being used, store out of reach of babies and
young children.
•
Make sure that all possible hazard sources (i.e. electric cables and wires)
are kept out of reach of the baby.
•
When the highchair is in use, do not place near to windows or walls where
ropes, curtains or anything else may be used by the baby to climb or may
cause suffocation or strangling.
•
Never use the highchair next to windows or walls to also avoid the risk of
unbalance to the highchair as a result of the baby using their feet to push
or pull, causing the highchair to fall.
•
When positioning the highchair close to a table, pay attention not to
tangle the legs of the baby. Care should also be taken if adjusting any
components whilst the highchair is being used to avoid injury.
•
If the highchair has been exposed to sunlight for a long period of time, it
should be left to cool before placing your baby in the seat, as prolonged
exposure to the sun will cause it absorb heat which could cause injury to
the baby’s skin.
•
Prolonged exposure to the sun should be avoided as it can cause colour
changes to the materials and fabrics.
•
Do not use spare parts or accessories that are not supplied or approved
by the manufacturer.
•
The manufacturer declines all liability for any damages to objects or peo-
ple as a result from improper use of the product.
•
In order to improve its products, the manufacturer reserves the right to
update and/or modify any technical aesthetic detail without any prior
notice.
•
If your child is too young to sit up unaided, the highchair must be used in
the recline position at all times.
•
The highchair can be cleaned using a sponge and lukewarm water with
a light detergent. It is also possible to use a non aggressive disinfecting
agent.
•
Particularly strong stains can be removed using a non abrasive cleaning
cream.
•
Never clean the highchair with abrasive products based on ammoniac or
bleaching solutions, or alcoholic detergents.
•
Never force mechanisms or moving parts. If you are in doubt, check the
instructions.
•
Moving parts can be lubricated with silicone oil.
