07
Assembly - Using the Harness
1.
Insert both shoulder
strap fasteners securely
into the loops located
on the side straps
2.
Press the two side
straps into the centre
clasp until both sides are
clicked in securely.
Adjust each strap length
as required.
3.
To undo the harness,
press the buckles in the
centre of the harness
and pull apart.
Assembly - Installing the Pram Hood
1.
Insert the metal
frame of the hood into
the corresponding re-
ceptors located on the
pram frame.
2.
Align the zip located
on the rear side of the
hood to the zip found
on the carrycot/seat
unit fabric and fasten.
3.
To remove the hood,
unfasten the zip, then
press both of the
hood connector but-
tons and pull the metal
hood frame upwards
.
To remove the harness during carrycot mode, place your hand through
the Velcro opening at the back of the carrycot and thread each of the
plastic tabs through the small gap in the wooden base and pull through
the front of the carrycot fabric. To reinstall, repeat the process in reverse,
and ensure that each harness belt is secured.
v.12.19
