Double-click at the top, left, on ‘Set up a home or small offi ce network’.
The Network Setup Wizard will start-up. This wizard will guide you through
the steps required to set up this computer to run on the network.
At the end, you will be asked whether a diskette is to be created. If you
wish to connect several computers to your network, run this wizard on
each computer. You can now share folders (directories) or connect to
shared folders located in other PCs.
H A R D W A R E I N S T A L L A T I O N
As soon as the power adapter of the switch is connected, the power LED
(Red) will light up and the Link/Act LEDs will light-up once. The other LEDs
(Green) will light-up as soon as one of the UTP ports is connected to the
computer. The LEDs will fl ash when data is transmitted from one computer
to another.
E N G L I S H
1 0
ndleiding-Network Switch1.01.indd 11
ndleiding-Network Switch1.01.indd 11
26-01-2007 16:02:2
26-01-2007 16:02:2
