T-CAM 300 P-SERIES USER MANUAL
24
9-21-2 Temperature Threshold Adjustment
By default the imager
alarm thresholds are set to HI = 130 °C and LO = 20 °C. Change the
thresholds as follows:
1.
Press the Menu button to display Main Menu.
2. Select the Settings icon:
3. Press the Confirm button to open Sub-menu.
4. Select HI/LO Alert.
5. Press the Confirm button.
6. To enable a threshold, select On for desired option. Select Off to disable the option.
7. Press the Confirm button.
8. Adjust the temperature threshold by using the Navigation buttons until the desired
temperature is reached.
9. Press the Confirm button.
10. Press the Previous button continuously to exit the menu and return to the thermal
image interface.
9-21-3 LED Alarm
The LED flashlight can be made to pulse when the threshold is exceeded. Turn the option
On/Off as follows:
1.
Press the Menu button to display Main Menu.
2. Select the Settings icon:
3. Press the Confirm button to open Sub-menu.
4. Select HI/LO Alert.
5. Press the Confirm button.
6. Select LED Alert.
7. Press the Confirm button. Slider will turn to the On position. To disable the LED flash
press the Confirm button again and the slider will turn to the Off position.
8. Press the Previous button continuously to exit the menu and return to the thermal
image interface.
THE USER WILL NEED TO ADJUST THE THRESHOLD FOR EACH
SETTING INDIVIDUALLY.
DO NOT POINT THE LED LIGHT OR LASER DIRECTLY AT PEOPLE
OR ANIMALS OR INDIRECTLY OFF REFLECTIVE SURFACES.
