GAS DETECTIR SERIES USER MANUAL
43
If the user encounters any problems while using the imager, refer to the following
options. If the problem persists, disconnect the power and contact the customer
support department.
11-1 Thermal imager does not power on
•
Ensure battery is installed
•
Battery terminals may have dirt; wipe the battery terminals with a clean,
dry cloth.
•
Replace old battery
•
Charge battery
11
Troubleshooting
11-2 Thermal imager shuts off unexpectedly
•
Replace old battery
•
Charge battery
11-3 No thermal image
•
Open the lens cap
•
If lens is foggy, use professional equipment to clean the lens
11-5 Camera out of focus
•
Adjust lens focus
11-4 Unclear or dark visible images
•
Turn on lights in imaging area
•
Turn on device light
•
If lens is foggy, use professional equipment to clean the lens
11-6 Temperature data is missing or has strange readings
•
Add a measurement spot, area, line, or tracker.
