ICI Caldaie REX 140, Инструкция по установке, использованию и техническому обслуживанию

Страница: 9 / 32

General information
9
CONTROL PANEL
The control panels which can be installed on REX boilers are mentioned in the table.
They must be ordered separately from the boiler and for to their technical and installation characteristics refer to the manual
provided with the panel.
To choose the most appropriate control panel for the system refer also to the
CATALOGUE , and to use it refer to the manual
supplied with the control panel.
Description Code
Thermostatic control panel QACC10ELMCE
eterm
boiler control panel QETERM01CE
eterm
system control board QETERM02
BURNERS
The burners that can be installed on the
REX
boilers must be CE marked according to European Directives:
–
European Regulation on Gas Equipment GAR 2016/426/EU
–
Electromagnetic Compatibility Directive 2014/30/EU
–
Low Voltage Directive 2014/35/EU
–
Machinery Directive 2006/42/EC (for liquid fuel burners)
They must also be able to operate on boilers with flame inversion combustion chamber.
Since the optimal operation of the boiler depends on the correct selection of the burner and its adjustment, find below some
points to take into account:
–
The firing range of the burner must include the boiler operating point (flow-back pressure in combustion chamber
considering the pressure at the base of the chimney as ZERO)
–
the length of the combustion head must be adequate to the penetration into the combustion chamber provided by ICI and
shown in the table
–
the length and shape of the flame must be suitable to the flame inversion combustion chambers. The burner manufacturers
have this information as they are required by certification.
Øb
P6
Description U/M
REX
140 160 180 200 240 300 350
Øb mm 320 320 320 360 360 400 400
P6 mm 350-400 350-400 450-500 450-500 450-500 450-500 450-500
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz