DX8
Dual Balance Charger/Discharger/DC Power
- 4 -
Copyright
Copyright@ 2021 Shenzhen New Junsi Electronic Co., Ltd. All Rights Reserved.
Without prior written consent by Shenzhen New Junsi Electronic Co., Ltd, any units or individual extracts or copies of part
or the entire contents of this manual, and transmission in any form is illegal and strictly prohibited.
The product described in this manual may include copyright software ownership belonging to Shenzhen New Junsi
Electronic Co. Ltd and its licensee, except with the express permission
from relevant rights holders, otherwise,
any copying, distribution, modification, excerpt, de-compilation, disassembly, decryption, reverse engineering, lease,
transfer, sub-license, as well as other acts of infringement of software copyright is strictly prohibited, but apart from the
restrictions prohibited by applicable law.
Special Features
13
The DX8 uses advanced Synchronous buck-boost DC/DC converter technology, high power,
a high current and
high-performance power conversion circuit. The maximum charge power capacity is up to 1600W, the maximum
charge/discharge current of a channel is up to 30A, and two channels in Synchronous Mode are up to 50A.
14
Each channel supports 8s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and
adopts a unique balance calculation of internal resistance correction. Supports 1-25s NiMH/NiCd batteries and 1-15s
Pb batteries.
15
With digital-power mode for great protection (over-current protection, over-voltage protection, input under-voltage
protection, input undercurrent protection, and etc.)
16
With type-c PD charging port, convenient for the user to charge mobile phones and PCs.
17
Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan
speed.
18
Internal temperature protection. When the internal temperature exceeds the Power Reduce temperature, the output
power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature.
19
This charger can save 64 parameters sets and support the data import/export to SD card.
20
A 2.4
"
IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance,
control status, time-consuming and temperature, etc.
21
Multi-discharge features: self-discharge, regenerative to input or discharge to another channel, and lithium battery extra
expanding discharge.
22
Supports measurement for internal resistance of battery offline and online. Measure not only the internal resistance of
the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.
23
DX8 has protection for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity,
overrun time and maximum power etc.
24
Supports upgrading the hardware program by USB port or SD card. DX8 also supports the “Junsi Console” software
and can display, plot and analyze the charge and discharge data by it.
