iCharger 106B+, Руководство пользователя

Страница: 3 / 30

-3-
iCharger Synchronous Balance Charger/Discharger 106B+
Thank you for purchasing one of the iCharger series. Please read the entire User‘s Manual completely and
attentively as it contains a wide variety of specific programming and safety information.
Specifications
106B+
Input voltage range: 10.0 – 18.0VDC
Charge current range: 0.05 – 10.0A
Discharge current range: 0.05 – 7.0A
Maximum charge power capacity: 250W @ input voltage > 13.5V
Maximum discharge power capacity: 20W
Maximum extern discharge power capacity: 170W @ 25V/7A
Current drain for balancing: <300mA
Balance accuracy: <10mV
Lithium (LiPo/LiIo/LiFe) battery cell count: 1 – 6 series (In non-balance mode, expand LiFe to 8s)
NiCd/NiMH battery cell count: 1 – 17 series
Pb battery cell count: 1 – 12 series (2 – 24V)
Battery setup memories: 10
Intelligent temperature control: Yes
PC Connect: USB port
Weight: 350g
Dimensions (L X W X D): 134X83X25mm
5.28‖X3.27‖X0.98‖
Special features
 High power, high current, high-performance power conversion circuit. The iCharger series uses
advanced Synchronous buck-boost DC/DC converter technology with an output conversion efficiency
that can reach over 90%. This not only saves power and reduces heat build up but also makes the
charger more compact and conveniently mobile.
 Two input power choices: DC jack with auto-resetting fuse (maximum input current 6A) and butt-welded
alligator clips with 4mm bullet connectors (25A).The output power can be adjusted to align with the
available input power, thus preventting input current overload and protecting the DC source.
 The iCharger series can be
u
sed with three types of Lithium batteries - LiPo, Lilo, LiFe - and has a fully
integrated cell balancer.
 Internal temperature sensor and temperature controlled automatic cooling FAN controls the internal
temperature and provides intelligent protection. When the internal temperature is over 60
℃
(140
o
F), the
output power is automatically reduced by 25%. If the temperature exceeds 65
℃
(149
o
F) the charge cycle
is stopped.
 Convenient set of 10 battery profile memories that can be saved and loaded by number.
 2x16 backlit LCD screen that provides rich information including active mode, current, voltage, total
charge (mAh), charging time and temperature etc.
 Various charging/discharging settings and cycles to meet a wide range of customer needs. For Lithium
batteries: balance charging, normal charging, fast charging, storage, discharging, ext-discharging,
charge/discharge cycling, and battery monitoring. For NiCd/NiMH batteries: charging-auto,
charging-manual, discharging, charge/discharge cycling and forming charge. For Pb batteries: charging
and discharging.
 Unique Lithium battery expanding discharge program. When you connect the external capacity
resistance, you can use it as the maximum discharge power capacity—170W (@25V/7A).
 Unique Lithium battery Monitor program. When you use other equipment to charge or discharge a
Lithium pack, you can use the iCharger to monitor the per-cell voltages, battery temperature and
process time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the
process has gone on for too long, the
iCharger will generate an alarm sound and the related information
will blink.
 Electric motor test mode can be used to run-in electric motors, test motor parameters and performance,
check tolerances etc.