11
EN
G
4.
Plug the power cable into the power socket (A).
5.
Connect the HDMI cable (D) of your TV or external video device into the connector panel
labelled HDMI.
6.
Plug in the network cables (B) for the WASPs into the RJ45 sockets marked “OUT”. The system
can support up to 3 WASPs but only 2 are required for most facilities. Additional WASPs sold
separately.
7.
If you would like to connect the system via your network to the internet, you can do so using
a network cable plugged into the RJ45 socket marked „IN“.
A
B
C
D
