icetro IB-026-22, Руководство пользователя, Страница: 3 / 4

Installation
1. Insert hose into the hose insulation and place the band spring.
2. Connect the drain hose to the drain under the product.
Place the hose and pull it by the hand to see if it is pulled apart.
If it holds, fix it with band spring.
Drain Hose
Band Spring
2. Remove the transparent protective film and attach it to the drain as follows;
Hose Insulation
Attach to the bottom of the product completely
Attach to the drain so that no air would get in
3. Cut the drain and insulation to appropriate lengths and connect to drain.
※ The hose connected to the drain shall be lower than the drain of the ice storage.
If it is higher, the water to be drained would flow back. Adjust the legs of the storage
so that the drain of the storage is at a higher position.
Ice Maker Door
Main Body of Ice Maker
Make sure the inner side of the door of the ice maker
placed on top of the storage is behind
this line .
(If not, it may cause dew or leakage.)
Ice Storage
Cautions in installing the ice maker
!
!
Warning
Be careful not to close the door while the
hand is still inside.