background image

13

Installation Checklist

Important Information : The installation engineer should check whether any installation 
part ha been omitted and follow the check list below to ensure safe and proper installation.

If you have any questions or problems regarding installation, address your queries 

to the distributor or dealer. You may also seek information on the company's website.

■ Does the ice maker work properly?
   If the ice maker does not work, check whether the plug has been inserted properly.
■ Did you remove all the packing materials and tapes from the inside of the ice maker?
■ Did you observe the instructions on installation?
■ Did you level the unit?
■ Is the front of the kick plate/grill adequately ventilated?
■ Did the user sufficiently understand the operation of the ice maker?

■  Be sure to follow any safety instruction for storing or disposing of an old ice maker. 
   Remove the door or fix the door firmly if the door is closed. If a child gets inside 
   the ice maker, and the door is closed, he/she may get injured.
◆ Be sure to observe the following:
■ Since the product makes use of water, proper water supply and draining facility 
   are required.
■  Be sure to use the product with a properly functioning drainage, since water may leak
   due to diverse causes during installation or usage. Leaks may cause electric shock due to 
   moisture, so make sure that the following are always observed:

1. When installing the product indoors, be sure to have a natural drainage facility and make
  the floor waterproof, especially if the floor gets damaged due to leaks.
2. A draining outlet must be available at the installation site; be sure to connect 
   the drain hose.
3. Make sure that the floor is sloped so that the leaking water may get drained away 
  even if the drain hose gets dislodged or damaged. Install a water overflow prevention wall 
  to prevent damage.

※ The manufacturer will not be liable for any issue arising from failure to comply with 
   the abovementioned warnings, dislodged / damaged water supply hose, or inappropriate 
   drain facility.

Warning

Содержание A25B15

























Отзывы: