last 1 second.
•
After setting alarming ringing, press
【
MODE
】
key to exit to clock mode
•
Press
【
ALARM
】
key, alarm mode will be on
（
ALARM light will be on
）
/ off
(ALARM light off)
•
When it is the set alarming time , the product begins alarming. When
alarming, press any key (except the
【
SNOOZE
】
key) to stop alarming. If
press
【
SNOOZE
】
key then activate the snooze mode(SNOOZE light will
flash, snooze time is 5 minutes (snoozing at most 2 times)
4). Radio mode
•
When not at alarm mode, press
【
RADIO
】
key to activate radio. At radio mode
press
【
RADIO
】
key to exit from radio mode.
•
At radio mode, then the frequency will display
•
Press
【
SET
】
key to play the saved radio frequency, and continually pres
【
SET
】
key to choose the next radio frequency.
•
Press
【
SET
】
key 3 seconds then one sound “BI”then the playing radio
frequency will be saved as the last memory. Can save 20 stations. If continue
saving, then the last saved frequency will make the first saved one lost.
•
Press
【
UP
】
to get previous frequency,
【
DOWN
】
to get the next
，
press
【
UP
or
【
DOWN
】
to auto scan stations forward or backward.
•
Press
【
ALARM
】
key 3 seconds to set sleeping time of radio, then press
【
UP
or
【
DOWN
】
to change the sleeping time for 10/20/30/40/50/60 minutes. After
setting sleeping time, repress
【
ALARM
】
key to exit the setting. When it is the set
time , then radio will be off.
•
At radio mode, press
【
SNOOZE
】
key to change to clock mode, 10 seconds
later radio will automatically restore.
•
Short press
【
VOL+
】
or
【
VOL-
】
key to adjust the volume, each time one
grade; Long press
【
VOL+
】
or
【
VOL-
】
key to fast adjust the volume.
5). Sound-control
•
When it can’t be always display, then sound- control can be effective
•
If can receive the sound signal, then display can last 10 seconds.
6). LED digital display
When disconnect outer power and only make it be clock mode, better push the
“Display”Switch to the “off” to save power.
•
The product can display long time (need much power) / display by sound-control. When
push the “display” switch to “off”, display will be off within 10 seconds , then press any
key and the display will last 10 seconds or by sound control it also can light up for 10
seconds.
•
When display is light, display will be only half bright during 21:00 PM
～
06:59:59 AM.
•
Connect with outer power then the product will always display(DC 6V 600mA)
7). AUX IN function
During radio play back mode, you may insert any other audio device into to the 3.5mm plug
into the “AUX IN (
Ф
3.5mm” jack)
