Icera iWash S-12, Инструкция по установке и эксплуатации

Страница: 19 / 22

17
PAIRING YOUR REMOTE
If your remote control is failing to activate functions on your seat, it is
possible that it will need to be re-paired with your seat. Follow the steps
below to pair your remote control with your bidet seat.
• Power off your bidet by pressing and holding the STOP button on the side
panel until the power indicator light on the side panel is off.
• Press and hold the STOP button and CLEAN NOZZLE button on your remote
simultaneously for 3 seconds until the indicator lights under the ICERA
logo on your remote are on and flashing.
• Power on your bidet by pressing and holding the STOP button on the side
panel until the power indicator light on the side panel is on.
• Check your remote. If the 3rd and 4th indicator lights under the Icera logo
on your remote are lit, you have successfully paired your remote with your
bidet seat.
• If the indicator lights are not lit, try the steps above again after 15 seconds.
• Please email service@icerausa.com if you are unable to pair your remote
with your seat.