9
6
INITIAL POWER-UP
On power up the master displays a blue welcome screen showing the applicable software version.
Press the CLEAR button to clear screen the screen.
RADIO/CLOCK FUNCTIONS – AM/FM VERSION
SETTING THE CLOCK
If the radio is on, press the POWER button to turn the
radio off. The time will be displayed.
Press and release the MEM button.
While the minutes are flashing, p
ress the UP or DOWN
buttons to adjust the minutes.
Press and release the MEM button again.
While the hours are flashing, p
ress the UP or DOWN buttons
to adjust the hours and AM/PM.
Press and release the MEM button once again.
Press and release MEM to set the time and exit
Time Set
mode.
Clock and radio setup applies only to
systems fitted with a master station.
Master Station clock and radio display
RADIO OPERATION
Press the POWER button at the master station to turn the radio on or off throughout the system.
(Time is displayed when radio is turned off)
Ensure the green TUNER indicator is illuminated at the master station (Press AUX then 3 if it is not)
Press the MUS button at any station to enable
Music
mode for that station.
(The red light will be on when
Music
mode is enabled)
The radio volume can be adjusted individually at each station using the VOLUME buttons.
Press the MUS button again to exit
Music
mode.
TUNING THE RADIO
Press the POWER button at the master station to turn the radio on.
Press the BAND button to select AM or FM.
Use the UP and DOWN buttons to select your desired radio station frequency.
If radio presets have been stored, you can select programmed radio stations by pressing the buttons
numbered 1 to 5. (Use the 5+ button followed by buttons 1 to 5 to select preset radio stations 6–10)
You can use the ME-UP button to sequentially select programmed radio stations 1–10.
STORING RADIO PRESETS
Press the POWER button at the master station to turn the radio on.
Use the UP and DOWN buttons to select the desired frequency.
Press the MEM button.
Press the desired preset button (1–5).
Press the MEM button again to store the station.
Note: For presets 6 to 10, press the 5+ button followed by one of the buttons 1 to 5.
USING THE WAKE-UP ALARM
Turn the radio ON
Select the desired frequency Band and Station
Turn the radio off again
Press and hold the ALARM key until the MINUTES begin to flash
Use the UP/DOWN keys to adjust the alarm time MINUTES
Press the ALARM key again – the HOURS will begin to flash
Use the UP/DOWN keys to adjust the alarm time HOURS
Press the ALARM key again – ON or OFF will be displayed indicating the status of the alarm function
Use the UP/DOWN keys to turn the alarm function ON or OFF as required
Press the ALARM key once again to complete the alarm programming procedure and return to the current time
NOTE: Ensure the radio is turned OFF so the radio can turn ON at the designated time.
If the radio is left ON, the function will operate in reverse and the radio will turn OFF at the designated time.