23
Auto Time
Auto Time - automating your
Navigator security system.
your iCentral Navigator panel has
sophisticated automation features
making full use of the onboard real
Time Clock and a set of powerful
yet simple to program options.
HOME
ARMED
ARMED
Arm or DISArm AUTOmATICAlly at pre-
programmed times of day or day of the week.
Increase site security. No need to rely on staff
remembering to arm or disarm the system.
TUrN AUX OUTPUTS ON or OFF at pre-
programmed times - every day, once a week,
any time. Automate doors, sprinkler systems,
lights and more.
eNABle/DISABle USer CODeS depending
on the time of day or day of the week. Allows
managers to grant users access to the system
at selected times and deny after hours entry.
(This applies to keypad codes only, not radio
keys or prox fobs.)
AuTO TIme WArNINg PerIOD
(Optional function - must be enabled by your installer.)
When an Auto Time event is about to begin, your keypad (or keypads) will begin a constant
slow beep as a warning that the automatic event is about to happen. The warning beeps can be
programmed to start up to 99 minutes prior to the AutoTime event.
Press any key on the keypad to stop the beeps during the warning period. The beeps will start
again for the final minute at a faster rate.
Final minute beeps.
In the last minute prior to the Auto Time event, the keypad will beep at a
faster rate to warn that the event is about to start.
TO DelAY THe AuTO TIme eVeNT
(Optional function - must be enabled by your installer.)
To delay the Auto Time event, enter a valid user code on its own. (The user code must be
assigned to an Area to work). This will suspend the warning beeps and the AutoTime event for 1
hour - when the warning process will start again.
example: your panel is programmed to Auto Arm at 6pm every weekday and the Warning
Period is programmed for 5 minutes. you are working back late and at 5:55pm your keypad
begins to beep. Since you're not ready to arm the system yet, enter your user code (without
pressing e) at the keypad. The warning beeps will stop and arming will be delayed by one hour.
At 6:55pm the warning beeps will start again, followed by automatic arming if you don't delay
the event again.
Any AutoTime event can be postponed, not just arming. you can also delay the automatic turn
(or off) of one of the AUX outputs in the same manner.
