Section 1. Installation
-
IMPORTANT!
This appliance must be left to stand in an upright position for
at least 4 hours before being switched on for the first time.
-
This appliance has been designed for Domestic Use Only.
-
Remove all packaging and securing tape from the appliance.
-
Wash the interior of the appliance with luke warm water containing a small
amount of bicarbonate soda (5ml to 0.5 litres of water).
-
This appliance has been designed and manufactured to operate efficiently
within an ambient temperature range of +16° to +32°C.
-
It is not recommended to site this appliance in a cold atmosphere, i.e.
garage, cellar or shed where the temperature may fall below 10°C.
Doing so may impede the efficient operation of the appliance and lead
to condensation issues - see below.
-
N.B. If you site this appliance in a garage/out-building or any other cold
environment, condensation may occur depending on the ambient
temperature. This may form on the outer cabinet and “pool” under the
appliance. This is quite normal and does not indicate that there is a
fault with the appliance. However, condensation droplets may also
enter the appliance and damage the insulation.
N.B. Condensation or related problems such as rust are not covered
under the manufacturers guarantee!
-
N.B. If you site this appliance in a very warm room/environment, i.e.
conservatory, the motor may run continuously and the required
temperature may not be achieved inside the cabinet.
-
Position the appliance in a dry atmosphere and out of direct sunlight.
-
Do not position next to a cooker or other sources of heat, i.e. radiator.
-
Leave a minimum gap of 2cm between the appliances in order to avoid
condensation.
-
Please ensure that there is a small ‘air-gap’ between the appliance and the
rear and side walls.
-
Do not place or store heavy items on the top of this appliance.
-
Ensure that the appliance is positioned on a firm flat floor.
-
This appliance must be level.
-
Ensure that the appliance is upright and wheels/feet are in firm contact with
the floor so that the cabinet is stable.
-
Connect the plug to an adjacent 13amp socket outlet and ensure that the
appliance is not standing on the supply cable.
8
Содержание TT47WE
Страница 19: ......
Страница 20: ...CKICK J03 A...