10
4.5. Reversing the door
Remove the plastic hinge cover.
Remove the screws and upper-hinge assembly then lift and remove the
freezer door away from the lower hinge assembly.
Now remove the hinge pin from the upper hinge, turn the hinge over and
refit the pin into the same hole.
Remove the screws, lower hinge and foot assembly. Now remove the hinge
pin from the lower hinge, turn the hinge over and refit the pin into the same
hole.
Remove the left foot and refit on the right-hand side.
Now fit the lower hinge and foot assembly to the left-hand side. Tighten the
screws.
Place the freezer door onto the lower hinge and then refit the upper hinge
into the pre-drilled holes on the left-hand side of the cabinet. Tighten the
screws.
Ensure that the door is correctly aligned and that the seal is sealing
correctly. If the door requires further alignment, slacken off the screws, re-
align the door then tighten the screws.
Now refit the top hinge cover.
Hinge Cover & Upper Hinge Assembly
Freezer Door
Lower Hinge & Foot Assembly
