Section 2. Installation
-
-
-
-
-
-
-
-
-
-
-
-
-
IMPORTANT!
This appliance must be left to stand in an upright position for at
least 4 hours before being switched on for the first time.
This appliance has been designed for Domestic Use Only.
Remove all packaging and securing tape from the appliance.
Wash the interior of the appliance with lukewarm water containing a
small amount of bicarbonate soda (5ml to 0.5 litres of water).
Condensation or related problems such as rust are not covered under the
manufacturers guarantee!
If you site this appliance in a very warm room/environment, i.e. conservatory,
the motor may run continuously and the required temperature may not be
achieved inside the cabinet(s).
Position the appliance in a dry atmosphere and out of direct sunlight.
Do not position next to a cooker or other source of heat, i.e. radiator.
Leave a minimum gap of 10cm between the appliance and surroundings
in order to avoid condensation.
Do not place or store heavy items on the top of this appliance.
Ensure that the appliance is positioned upright and on a firm flat floor.
This appliance must be level.
Connect the plug to an adjacent 13amp socket outlet and ensure that the
appliance is not standing on the supply cable.
7
