7
INSTALLATION
START-UP
•
Fully unpack the appliance. Please ensure that all packaging materials
are removed and properly disposed of prior to installation and are kept
out of children’s reach.
•
The appliance should be installed in a dry, well ventilated room and not
exposed to direct sunlight and not placed near a heat source.
•
Leave at least a 10cm space between the appliance and surroundings for
ventilations and dissipation.
•
The electricity supply must conform to as specified on the rating plate and
follow local regulations.
•
It is recommended to wait at least four hours with the product in an
upright position, before plugging in the appliance after installation. This
helps the refrigerant circuit to stabilize.
•
The product must also be on stable flooring and be straight and level.
1. Insert the plug in the socket. The green light (See page 9, position 2)
or the display will come on.
2. Allow one hour for the temperature inside the appliance to go down
and then place food inside the appliance.
For FIG 2; 1 is the warmest setting and 7 is the coldest setting. Under
normal conditions the temperature control should be set between 3 and 4
Do not place warm food into the refrigerator.
The capacity of the appliance, as shown on the rating plate, should
not be exceeded.
When filling the appliance with large quantities of fresh food, it is
recommended to turn on the super freeze function (if available) 24
hours in advance.
The storage time for purchased deep-frozen products varies and
depends on the type of product and its packaging. Therefore, strictly
observe the producer/manufacturer’s instructions on the packaging.
TEMPERATURE SETTING
