Iceking CF100WE, Инструкция по установке и эксплуатации

Страница: 9 / 20

8
SECTION 3: INSTALLING YOUR FREEZER
Unpacking Your Freezer:
•
Remove all packaging material. This includes the foam base and
all adhesive tape holding the freezer accessories inside and
outside.
•
Inspect and remove any remains of packing, tape or printed
materials before powering on the freezer.
Adjusting Your Freezer:
•
Your freezer is designed for freestanding installation only. It
should not be recessed or built-in.
•
Place the freezer on to a solid floor strong enough to support it
fully loaded.
•
When moving the freezer, never tilt it more than a 45-degree
angle. This could damage the compressor and the sealed system.
•
If the freezer is tilted let it stand in an upright position for at
least 24 hours prior to switching on. This is to allow the
refrigerant to settle.