23
Step by Step to resolve Playfield Movement Issues:
No Movement:
Step 1
: Use a voltage meter and measure between pin 1 of J1 on the relay board and ground on the
either power supply. Is +15 VDC present at pin 1?
Yes
, continue.
No
, check the +15 VDC power supply for proper function, replace if necessary.
Step 2
: Use a jumper wire and briefly connect pin 2 of J1 on the relay board to any ground on the
power supply. Did the playfield spin a direction?
Yes
, check the wire from Pin 2 of J1 to J15, pin 2 on the main board using the Ohm
setting of your voltage meter. If reading less than a ohm, replace the main board
(TL2034X). If open or high resistance, check the pins and repair if necessary. Other
wise replace the harness.
No
, check for 15 volts of DC on J2 of the relay board (the polarity doesn
’
t matter).
If missing replace relay board (ZS2035X).
If present, measure harness to motor, check motor connection. Replace/repair
as necessary. If voltage is present at motor and motor still doesn
’
t rotate, re
place motor.
Note: direction change occurs at 7, 14, and 21 seconds of the game as long as game time is at 22. Altering
game time will also change how many times the game will change direction.
No Reverse Direction:
Step 1
:
Using a voltage meter measure the voltage present at pin 3 of J1 on the relay board. Use the
power supply ground for your DC ground. Leave the probes on to monitor the voltage at pin 3
during a game. Voltage should be present while the playfield rotates in one direction and
drop to 0v the other direction. This will occur depending on how many times the game
changes direction. Voltage present one way and not the other?
Yes
, but the playfield rotated in only one direction, replace ZS2035X relay board.
No
, check wiring from J1, pin3 to J15, pin 2 of the main board. Measure the ohms.
If 1 Ohm
or less and pins of the connectors are good, replace TL2034X main.
If open or more than a ohm
, repair wiring or replace harness. Retest.
Содержание Bean Bag Toss
