2.2 Hard Drive Installation
If the receiver has no hard drive installed, install a hard drive on the receiver for
its best performance by taking the following steps:
1. Turn off the receiver and disconnect it from the power source.
2. Unfasten the screws at the rear and both sides of the receiver to remove the
cover.
Note
Opening the receiver casing for any other purposes than installing a hard
drive voids the warranty. This condition may vary depending on the
local distributor’s warranty policy. Contact the local distributor for de-
tails before opening the casing to keep the warranty valid.
3. Attach a hard drive to the provided bracket using the accompanying screws.
16
I
