Ice SoftBank Whiz, Руководство пользователя

Страница: 3 / 14

■ When the machine detects danger or detects an obstacle, an alert will be displayed on the notification pager
(see "Alert display and its notification timing") and it notifies the operator by emitting an alert and vibrating. It
emits an alert and vibrates for 15 seconds then stops for 5 seconds, which it repeats for 10 minutes. After the
error with the machine has been resolved, the notification pager sounds for 1 second and its display indicates
standby.
■ To receive alert notifications, pair the machine and the notification pager. (see "Pairing the Notification Pager")
Once the display on the notification pager indicates communication, place it in the pager compartment to
complete pairing.
■ During autonomous cleaning, always carry the notification pager on you. Alerts cannot be received while
the notification pager is in the pager holder.
■ The range in which the notification pager can communicate with the machine is a direct line up to 300 m
(985 ft) (2 floors above and below).
* Range of communication depends on the environment. Communication may not be possible such
as where there are walls with metal.
■ After using the notification pager, place it in the notification pager charger (see "Recharging the Notification
Pager").
■ If the notification pager won't be used for a long period of time (approx. 2 months) turn the switch Off (see
"Turning the Notification Pager On/Off")
Start autonomous cleaning
Sound
／
Vibration
Object detected Receive alert notification
3
1-1-1.Notification Pager Functions & Usage