2
Harpoon Lagoon Marquee Install Guide
Step 2:
Open each side’s coin doors and locate the bolt slots shown below. Attach the cabinet
on each side with a 5/16 x 1 3/4 bolt, 1 1/2 - 2”washer and 1 1/4” washer on each side. The
cabinet is now securely fastened to the marquee support assembly.
Step 3:
Located at the bottom of the upper monitor support bracket are two hooks. These
hooks are designed to slide into two slots located underneath the monitor assembly. This will
allow you to place the monitor assembly on top of the upper monitor support bracket and slide
it fully to the right to access the wiring without the monitor assembly falling onto the floor.
Hooks
Slot