Ice 2009 Trice Q, Инструкция по сборке и руководство пользователя

Страница: 18 / 53

18
2.10 Fit the chainset
You now need to install the left and right sides of the chainset. Your trike is supplied with the bottom bracket
already installed. It is every important to follow these instructions exactly. If the chainset is not installed
correctly, it will develop play and annoying movement soon after being put into service.
Grease the inner bearing races as shown in the diagram. Grease is good… don’t be afraid of using too much. Slide the
right crankarm and spindle assembly through the bottom bracket until the left side splines come through the left
bottom bracket cup, and the spindle stops. There will be a gap of about 3mm between the right crankarm and the
bottom bracket.
Assemble the left crankarm onto the bottom bracket spindle using an 8mm hex key and torque as shown. The left
crank arm will press against the bottom bracket with no gap. Check the assembly for play by pulling the crankarm
away from the boom, alternating back and forth. If the crank moves, tighten crankarm bolt until no play is detected.
If maximum torque has been reached, remove the crankarm from the spindle, apply additional grease, and repeat the
installation. It may take several installations to eliminate all play.