14
ICE i28BTL / i28BTL-CY / i32BTL
OPERATOR MANUAL
FAULT CODE & SOLUTION
The machine is equipped with a LED display screen
(Panel components, item # 4), the LED screen will
display the operating hours (Panel components,
item # 17) and the battery level status (see Panel
components, item # 2).
When the machine detects a fault, there will be a
Fault code (Panel components, item #18) & Fault
message (Panel components, item #11) display
on the LED screen, and the Fault indicator (Panel
components, item #1) will flash continuously,
accompany an audible alarm Occasionally.
Once fault occuring, please DO NOT continue
operate the machine unless the fault are eliminated.
Turn off the machine, then to solve the fault, the
fault code & message will be eliminated when
machine restart.
If the fault is occurred frequently, or the fault can't
be eliminated, please contact ICE service center.
Please refer to the below table to determine the
fault cause and the solution.
FAULT
CODE
FAULT MESSAGE
FAULT CAUSE
SOLUTION
F03
Bru Actt O.L.
RESTART!
Scrub head lifting actuator is overload
Turn off the machine,after a moment,
RE-START machine.
F04
Vac Mtr O.L.
RE-START!
Vacuum motor overload
F05
Left Bru Mtr O.L.
RE-START!
Left brush motor is overload
F06
Right Bru Mtr O.L.
RE-START!
Right brush motor is overload
F07
Propel Mtr O.L.
RE-START!
Propel motor overload
F08
RecTank Full
Recovery tank is full
Drain the Recovery tank
F10
Batt Low
Charge Batt
Battery is low
Charge the battery
F11
Batt Empty
Charge Batt NOW
Battery is empty
Charge the battery NOW
F12
Brake Wiring Error
Bad Brake wiring
Check the brake wiring
F14
Replace Brake Assy
Bad Brake assembly
Replace the brake assembly
F16
Control Unit Overheat!
Wait
Control Unit Overheat
Turn off the machine,after a moment,
RE-START machine
F17
Replace Control Unit
Control Unit Fault
Replace the control unit
F20
Check Left Brush motor
Bad left brush motor
Check left brush motor/ wiring
F21
Check Vac Mtr
Bad Vacuum motor or wiring
Check the vacuum motor / Wiring
F22
Check Soln Solenoid
Solution solenoid wiring fault
Check the wiring & Contactors
F23
Replace Soln solenoid
Bad Solution solenoid
Replace the solution solenoid
F24
Check Propel Motor
Bad propel motor
Check the propel motor / Wiring
F25
Check Right Brush motor Bad right brush motor
Check right brush motor/ wiring
F40
Check Proximity Sw
Proximity switch fault
Check the Proximity switch
F41
Release Handle
Operation mistake
Release the control handle bail
F42
Replace Control Unit
Bad Control Unit
Replace the control unit
F43
Turn Dead Sw Off
RE-START!
Emergency stop button activated
Release emergency stop button and
restart machine
F44
Replace Control Unit
Bad Control Unit
Contact service center, Replace the
Control Unit
F45
Return Control Unit
F46
Return Control Unit
F47
Return Control Unit
F48
Return Control Unit
Содержание i-SYNERGY i28BTL+
