ICE COBOTICS Cobi 18, Руководство пользователя и эксплуатационное руководство

Страница: 3 / 9

Machine Setup and Installation
4. Squeegee Install and Removal
• Hold the squeegee by pinching the 2 holders, ensuring the
magnetic surface faces upwards, simply lift it up to lock and
install. Pull it down to unlock and remove.
1. Main Brush Install and Removal
• Check and ensure the machine is turned off.
• Remove the tank assembly, mop and squeegee.
• Gently lay the machine on its back on the floor with its front
facing upwards.
• Open the right-side door, hold the installing hub of the main
brush, ensure the socket on the end aligns to the driving
gear correctly, turn left to lock the hub and install the main
brush.
• Close the right-side door, gently raise the machine and put
it in the upright position.
3. Hopper Installation
• Open the right-side door, hold the hopper on the end and
ensure the magnetic surface faces up, simply push it in to
lock and install.
• Close the side door.
2. Side Brushes Install and Removal
• Open the left side door, hold the side brush and ensure the
install socket is properly aligned to the drive gear, simply
push it up to lock and install. Same procedure to install the
right-side brush.
• Close the side door.
6. Filling the Solution Tank
• Check and ensure the machine is turned off.
• Raise the transport handle, lift the tank handle, then remove
the tank assembly .
• Remove the solution tank cap. Fill solution tank with clean
water and the appropriate cleaning detergent. Install tank
back on the machine, ensuring the rubber stands align to
the tank holder base.
• Check around the machine and ensure there are not any
water leaks.
5. Mop Install and Removal
• Ensure the squeegee is installed on the machine before
installing the mop.
• Attach the microfiber cloth mop on the mop holder via hook
& loop before installing the mop.
• Hold the mop and align the socket on the mop holder and
the hook on the squeegee holder, push it down to lock and
install the mop.
• Make sure the battery power button is turned on.
• Plug battery power cord into approved power outlet
to charge the battery. Keep the battery door open for
ventilation.
• Store the machine in an approved area. Folding the handle
down will set the parking brake for secure storag
e.
7. Charge the Battery
Fill the solution tank
with clean water and
add the appropriate
cleaning detergent
833-423-7626 | info-us@icecobotics.com |
us.icecobotics.com