Ice Bear PMZ50-21, Руководство пользователя

Страница: 28 / 39

when the engine is warm, when replacing the engine
oil, support your motorcycle with side stand to
facilitate draining the oil fully. The procedure is as
follow shown:
1) Stand your motorcycle with side stand. Put a
drain pan under the engine.
2) Unscrew and remove the oil drain bolt
①
under the engine to drain the dirt oil.
WARNING
To avoid unnecessary hurt when the fuel and engine
oil was heated.
3) stamp the kick starter lever for several times to
drain the remaining oil.
4) Replace the used oil filtering net with a new
one, check whether the spring and sealing washer are
well installed.
5) Pour 0.8L recommended oil into the engine.
Start the engine, let it run at idle speed for 2-3
minutes, shut off the engine and wait for a minute,
check whether the oil is at upper level mark. If the
oil level is below the upper level mark, add the oil
until it reaches the upper level mark.
NOTES:
1) Check oil filler and oil drain bolt carefully to
avoid dripping.
2) Engine oil should be replaced frequently when
26