Iccons GTI-140, Руководство пользователя

Страница: 8 / 20

8
Serious Connections
TM
ICCONS™ GAS TOOL GTI-140 USER MANUAL
5.4 Preparing The Fuel Cell
Caution !
• Never attempt to use fuel cell from
other manufacturer.
• Do not remove the cap when it is
unused.
• Never drill a hole on the fuel cell.
• Do not inhale the gas. Breathing in the
gas could cause sleepiness, dizziness or
nausea.
• The fuel cell is not refillable, do not
attempt to refill the gas.
Steps:
First ensure to use the correct colour valve,
the colour of the rim for IS140 should be
green.
1. Detach the cap, attach the valve by
pushing in the front edge.
2. Pushing the rear edge until it has
“clicked”.
NOTE:
• Make sure the fuel cell valve is attached
firmly, if not, gas leakage may occur and
create hazards to users and bystanders.
5.5 Installing & Removing Fuel Cell
C
aution !
• Make sure the trigger is not held while
inserting fuel cell.
• Empty fasteners in the magazine before
installing fuel cell.
• Do not press on the surface ground
while installing.
Steps:
1. Push up and pull to open the fuel door.
2. Insert the fuel cell, direct the jet nozzle
into the adaptor.
3. Put the can door over the valve and push
it down to latch.
4. For removing fuel cell, reverse the above
steps.
5.6 Installing & Removing Barrel
Caution !
• Make sure the trigger is not held while
inserting barrel.
• Do not press on the surface ground
while installing.
• Do not cover the barrel with your hand
while installing.
Steps:
1. Press down and hold the adapter for
barrel.
2. Insert the barrel and release the adapter.
3. Rotate the barrel until the adapter
returns to its original position.
4. For removing press and down the
adapter and pull the barrel out.