ICC EXCELPrime, Инструкция по установке и обслуживанию, Страница: 4 / 8

EXCELPRIME 4
Owner’s Manual
1. Assemble the adjustable
length (see instruction for
straight up installation).
2. Screw the 90° elbow to the
adjustable length using the
3/8
” metal screws
provided.
3. Set the adjustable length
so that the shrunk bottom
fits into the flue collar of the
stove. Screw the pipe to
the flue collar with three
3/4” metal screws. The
black screws provided are
self drilling and will not
normally need a pilot hole
for steel stove collars.
4. Extend the adjustable length up until the 90° elbow reaches the chimney
pipe adapter. Screw the elbow to the adapter using the three 3/8
” metal
screws provided.
5. Screw the two sections of the adjustable length together using at least one
3/8
” metal screw provided.
MASONRY CHIMNEYS
Connecting to an existing masonry chimney with EXCELPrime requires a
masonry adapter (SWM).
To block off a vacant opening into a masonry chimney you can use the masonry
plug (SWMP). Follow step 1 below for installation.
1. Install the Masonry Adapter (SWM). Bend the tabs
outwards and press the Masonry Adapter firmly
into the existing thimble of the masonry chimney.
The tabs will secure it in place.
2. Insert a length of EXCELPrime into the opening of
the masonry adapter. The length should pass all
the way through the adapter and extend into the
flue of the masonry chimney. Secure the length in
place by screwing into the tabs on the masonry
adapter.