ICC ETH-1000, Руководство по установке

Страница: 6 / 54

6
DEVICE CONFIGURATIONS DEVICE CONFIGURATIONS
ETH-1000 WIRING
)LJXUH VKRZVWKHVWDQGDUGFRQ¿JXUDWLRQRIWKH(WKHUQHWPRGXOHV
The module has connections for 9 VDC power, three wire connections
for the communication breakout cable, and a port for the connection
of the EMS system through Ethernet RJ-45 cable communications.
Figure 6.
6WDQGDUG&RQ¿JXUDWLRQIRU(WKHUQHW0RGXOHV
Connecting of the power adapter and the boiler or water heater
communication cable to the module is accomplished on the same
end of the unit.
)LJXUH
is a close up of the connection terminal and
)LJXUH
shows the appropriate connection to the strip using the power
adapter and communication cable.
The provided communication cable has two RJ-45 plugs. Remove
one with a wire cutter, then locate and strip the 3 wires described
EHORZDQGVWULSLQFKRILQVXODWLRQEHIRUHFRQQHFWLQJ
Figure 7. Connecting the Power Adapter
Brown/White Wire*
Jumper
Brown Wire*
Blue/White Wire*
Black/White Wire
†
Black Wire
†
*From Communication Cable
†
From 9 VDC Power Adapter Cable
RS 485
A B Y Z
Power
GND
Power
Pos
Jumper
Figure 8. Connections from the Communications and Power Adapter Cables
The connections in
)LJXUH
are the same regardless of the appliance
or the communication protocol.
At the opposite end of the module is the connection location for the
EMS LAN connection. The EMS uses an Ethernet connection with
an RJ-45 connector. Plug the cable into the RJ-45 receptacle.
)RUPRUHLQIRUPDWLRQRQFRQQHFWLQJWKH,&&*DWHZD\WR\RXU%XLOGLQJ
Management System, please refer to the User Manual provided on
WKHHQFORVHG86%NH\LQWKH³'RFXPHQWV´IROGHU7KHWZRDSSOLFDEOH
documents will be found in the Manuals.
MIRIUS WIRING
)LJXUH VKRZVWKHVWDQGDUGFRQ¿JXUDWLRQRIWKHPRGXOH3RUW$RI
the module has connections for 9 VDC power and serial
FRPPXQLFDWLRQV IRU (06%06 %$&QHW RU 0RGEXV 3RUW % KDV
FRQQHFWLRQV IRU WKH FRPPXQLFDWLRQ EUHDNRXW FDEOH IRU VHULDO
FRPPXQLFDWLRQVWRWKHZDWHUKHDWHUERLOHU
)LJXUH
is a close up of the connection terminal and
)LJXUH
shows
the appropriate connection to the strip using the power adapter and
(06%06FRPPXQLFDWLRQFDEOH