ICC
INDUSTRIAL CONTROL COMMUNICATIONS, INC.
Page 3 of 10
05.23.2014
0720-160-MC
1600 Aspen Commons, Suite 210
Middleton, WI, USA 53562
Tel: (608) 831-1255
Fax: (608) 831-2045
Email: [email protected]
Customizing the ETH
-
1000
’s Configuration
The ETH-1000 can be configured via USB using the ICC Configuration Studio. Certain network settings and
BACnet settings may need to be modified to match a specific network configuration. To modify the gateway’s
configuration, open the ICC Configuration Studio and connect the gateway via the included USB cable. The
software will automatically recognize the connected device and upload the current configuration file stored on the
gateway. The configuration must be downloaded back to the gateway after making any changes. The latest ICC
Configuration Studio is available at
http://www.iccdesigns.com/icc-configuration-studio.html
.
Ethernet Network Settings
The network settings may need to be modified to be compatible with your network. These settings can be
modified in the ICC Configuration Studio by selecting “Ethernet” in the Project Pane and changing the settings in
the Settings Pane as shown in Figure 3.
Figure 3: Network Settings
BACnet Communications Settings
The UDP Port, Device Name, and Device Instance may need to be modified to be compatible with your network.
These settings can be modified in the ICC Configuration Studio by selecting the corresponding items in the
Project Pane and changing the settings in the Settings Pane. The UDP Port can be changed by selecting
“BACnet/IP Server” and entering the desired UDP port number in the UDP Port field as shown in Figure 4. The
Device Name and Instance can be changed by selecting “Device Object” and entering a value in the Device
Name and Instance Number fields as shown in Figure 5. The default settings for the gateway are shown in
Error!
Not a valid bookmark self-reference.
.
Figure 4: BACnet/IP UDP Port
