ICC ECAT-1000 Скачать руководство пользователя

Страница: 32 / 58

ICC

At the end of the log, the studio records statistics for the batch update session.

The statistics include the following information:

Devices Discovered

The total number of devices discovered while in batch update mode.

Successful

The total number of devices that were updated successfully.

Failed

The total number of devices that the studio failed to update.

Not Updated

The total number of devices that were not updated. This can occur if a

device is already up to date, or if a device has limited network

connectivity and cannot be updated.

Firmware Updated

The total number of firmware updates performed.

Configuration Updated

The total number of configuration updates performed.

Errors

The total number of devices that encountered an error while being

updated. Note that this does not necessarily imply that the device failed

to update.

8.3

Internal Logic Settings

8.3.1

Fail-safe Values

8.3.1.1

Overview

The gateway can be configured to perform a specific set of actions when network

communications are lost. This allows each address in the database to have its

own unique “fail-safe” condition in the event of network interruption. Support for

this feature varies depending on the protocol: refer to the protocol-specific

section of this manual for further information.

Note that this timeout feature is only used with slave/server protocols: this is not

the same as the Timeout time used for service objects in master/client protocols.

There are two separate elements that comprise the timeout configuration:

•

The timeout time

•

Timeout Object configuration

Содержание ECAT-1000



























































Результаты поиска

Содержание ECAT-1000

Отзывы:

Похожие инструкции для ECAT-1000

Бренды по названию

Популярные бренды

ICC ECAT-1000, Руководство пользователя

Результаты поиска

Содержание ECAT-1000

Отзывы:

Похожие инструкции для ECAT-1000

Бренды по названию

Популярные бренды