Icarus NANO 106, Руководство пользователя

Страница: 31 / 36

Page 31 of 36
At this point, three cells of the nose should extend from each side of the pack job. Count the
cells at the nose and verify that the previous step did not pass any fabric around any portion of
the nose of the canopy.
S fold the nose under the canopy as shown to the width of the remainder of the canopy.
Repeat for the other side.
Now, the width of the canopy should be approximately the same as the width of the freebag
being used.
The remaining folds will form the canopy into a molar shape to fit into a typical freebag. Again,
the size of these folds should be determined by the rigger to distribute the bulk of the canopy
appropriately for the container system being used.
Make the first S fold as shown, taking care to keep equal tension on the lines.
I CARUS_NANO_01.01.18 V01 Owners Manual Letter
ICARUS Canopies, S.L. / ICARUS Canopies, Inc. - Copyright 2018 © - www.icarusworld.net
This document has no contractual value and in some cases the descriptive content may contain inaccuracies.
OWNERS MANUAL
01 . 01 . 18 V 01