18.
Micro SD card slot
3. Using your ICARUS Reader Go
Turning On
• Press and hold the [Power] button for 2 seconds to turn
• It may take a few moments for the reader to turn on and load the content.
• If the reader does not turn on, you will need to charge it first
Turning Off
• Press and hold the Power Button for 2 seconds to turn off.
Charging
• You need to the reader prior to using it for the first time or when battery power is low.
• You can charge by connecting the reader to a computer or USB power adapter via the supplied
USB cable.
• It will take about 4 hours to fully charge the reader using power adapter rating 5V, 1.5A.
• During charging, the LED indicator turns Red. When fully charged, the LED turns blue.
• The charging status is shown as below:
Battery low Charging
Fully charged
Inserting a SD card
• The ICARUS Reader Go only supports micro SD cards.
• To view content inside the card, insert the card into the Micro SD card slot.