iCarsoft HD V3.0, Руководство пользователя

Страница: 29 / 31

Heavy Duty & OBDII Diagnostic Tool HD V3.0
25
EN
Question: System halts when reading data stream. What is the reason?
Answer: It may be caused by a slackened connector. Please turn off the
diagnostic tool firmly connect the connector, and switch on it again.
Question: Screen of main unit flashes at engine ignition start.
Answer: Caused by electromagnetic disturbance and this is normal
phenomenon.
Question: There is no response when communicating with on-board
computer.
Answer: Please confirm the proper voltage of power supply and check if the
throttle has been closed, the transmission is in the neutral position, and the
water is in proper temperature.
Question: Why are there so many fault codes?
Answer: Usually, it caused poor connection or fault circuit grounding.
Note: All pictures illustrated here are for reference and demonstration
purpose only and this User
‟s Manual is subject to change without prior notice.