AI MDVR Installation and debug manual
26
⑤
Measure the horizontal distance from the camera to the front bumper
and fill it (unit: mm).
⑥
Fill the height of the camera in ② (unit: mm) and select the camera
resolution.
⑦
Measure the camera to the center of the vehicle and fill it. When
installed to the center position, fill in 0. If the camera is located
to the left of the center position, select "Center Left", and if
the camera is located to the right of the center position, select
"Center Left" and then set the corresponding deviation value.
Note: Choose the left or right center to fill in the deviation
value correspondingly, there is no difference between positive
and negative.
5.1.2
Frame drawing
5.1.3
Enter vehicle parameter information
Enter the third step calibration interface, you need to enter the
following parameters;
